• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Electric Fireplace Wall Hanging Ideas

The wall-mount electric fireplaces are ready to use right out of the box. They're a great way to add the ambience without venting or remodeling.

However, they typically require careful installation because they're usually heavy. Follow these steps to hang your new electric fireplace properly.

1. Connect the Brackets

A wall hanging electric fireplace-mounted electric fireplace or recessed fire instantly transforms any space. This is an excellent option for those who don't have fireplaces or live in apartments.

Choose where you'd like to put your electric fire. You should select a spot that is not susceptible to moisture, and at least at least a few feet away from furniture and drapes. Mark the wall with layout marks to indicate the top and bottom plates for the fireplace frame.

Use a drill or similar tool to make exploratory holes in the wall. Check for studs using a stud-detector. Mark the drywall according to the location of the fireplace mounting brackets. Next, build out the wall or patch and paint the drywall to prepare it for fireplace installation.

Depending on your chosen wall-mounted fire, you might have to either install the screen and firebox as one unit or separate them with the use of a wall bracket. If you aren't sure of your ability to complete this project, hire a general contractor or a skilled carpenter.

There is an installation template that comes with all electric fireplaces. However it is recommended to keep a level in your pocket and pencil to mark the exact location where the wall brackets will be placed. Use the template to ensure that the power cable of the fireplace is able to connect to an outlet nearby to connect it.

When the studs and fireplace frame are in place, you can then install a drywall that is as smooth and flush as possible for a sleek appearance. Add trim to the bottom edge, and then sand, paint and finish the frame.

You will need to insert the hooks or slots on the back of most wall-mounted electric fireplaces into the brackets for mounting. Make sure that the slots and hooks are aligned before connecting the fire to the wall brackets. Once the fire is in position you can add additional elements such as crystal embers or driftwood log pieces or decorative rocks.

2. Check the Bottom Bracket

The space that is above a fireplace mantel, chimney breast, or mantel is a prime spot for hanging artwork. There is a fine balance between an artistic arrangement and one that detracts the overall style of the fireplace.

Generally speaking, the rule of thumb is that a picture should be around 80% the width of the mantel or firebox it is placed over. This will keep it proportionate and look great on the wall. This guideline may be affected by other ornaments or decorative items on the mantel.

If you intend to hang a photograph above your electric fireplace, the frame should be made of glass or a material that can withstand high temperatures. If you're not sure then a quick test using a heat-sensitive cloth should reveal whether the frame is suitable for this type of installation.

One of the most common concerns when hanging pictures above an open flame is the risk of damage to the artwork from smoke or other heat sources. While this isn't a major issue with traditional gas or wood-powered fireplace, it's worth examining the manufacturer's guidelines if contemplating using an electric fireplace that is mounted on the wall.

Most electrical fires have an attached bracket that can be fixed to the wall using hanging screws or a wall fitted electric fires-mounted fixing system. It is recommended that you drill exploratory hole in an isolated area of the wall prior to mounting your electric fireplace wall hanging fire. You can then make use of a cable and pipe locater to ensure that there aren't any pipes or cables close to the location where you want to mount your fire.

If there are, you can then decide to place your fire on top of the electrical socket or relocate it to a different spot. If you choose to move it to a new spot you'll need to make sure that the power cable extend from the fire to the electrical socket. this is particularly important for older homes or houses with solid walls. In the event that it doesn't the electric fire won't perform as it should. Some models come with a template to show you the locations to drill holes, while others require a spirit level and pencil to mark the location on your wall.

3. Connect the Power Cord

You may need to move your plug socket in front of the unit if you have installed a recessed fireplace. This will give you an elegant look. Test the fireplace first to make sure it is operating correctly.

The third way to mount an electric wall mounted fire place fireplace is by framing the space and building it into the wall. This gives you a traditional, finished look and allows for a mantel. The owner's manual for your particular model will provide information about framing, securing the fireplace, and wiring.

When you're ready to install your new electric fireplace on the wall begin by marking the area of installation with a pencil or marker. Use a carpenter's level to ensure that the installation area is flat and level. You can also employ a stud finder to mark the location of studs, so that you are sure that you're drilling in an area that is safe.

Use your electric drill after having identified the location of installation to create holes for the bracket screws or hanging screws. Follow the steps in the owner's manual for this step. This is especially crucial if you're installing the fireplace in the drywall. If you're not sure how to go about it you can always consult a professional to handle the installation for you.

A cable organizer kit can be used to conceal power cords. These kits typically come with clips, sleeves or boxes to bundle cables. You can use fish tape or wire snakes to guide the cables. If you do not want to cut the drywall, a Powerbridge kit can provide a more secure and safer connection.

Additionally, you can disguise the wires by painting them with paintable covers or by attaching them to the wall and skirting boards. Be sure to keep the cover or tacks away from the source of heat however. This will shield the cord from damage and prevent accidental contact.

4. Connect the Adapter

A wall-mounted electric fireplace is a great choice to make for home improvements or those who do not have the space or money to install gas fireplaces. They are easy to hang and are ready to use right from the box. They are an excellent choice for those seeking a modern and stylish touch or the warmth the fire can bring. These units can be put up on any wall, just like art, and Electric Fireplace Wall Hanging are electric with fan-powered heating.

Before beginning the actual installation process, it's recommended to take stock of all the tools and equipment you'll need. You can find detailed instructions on how to install an electric fire in the user's manual. Certain models require brackets to be screwed directly into the wall while others may feature mounting plates that slide into slots or hooks on the brackets. It is essential to remove any combustible materials from the area in which you'll be installing a fireplace that is recessed. As a general rule they should be kept 3 feet away from the front of the fireplace and 1.5 feet from its sides.

After you have inspected all the components After you have checked all the components, plug in your electric fire and ensure that it works. This is an important step to ensure the flame effect screen and heater operate exactly as they were intended to. This will also give you an idea of how the product will look in its final location.

Cover the cord when you are sure that it's working correctly. This will help keep the final product neat and neat. It is possible to do this by using wire covers that are paintable or you can choose to install a new outlet that will allow you to place the cord behind the unit. This will give seamless finishing to your fireplace.