• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Autowatch Ghost II Immobiliser Review

Autowatch Ghost is the next generation in car security. It is invisible to thieves, and it is impossible for them to open the vehicle without a unique pin code.

The system is based on your vehicle's CAN Data network and is silent and therefore cannot be detected by common thieves diagnostic tools or radio signals. It does not require any circuit cuts to install.

What is a Ghost Immobiliser?

A ghost immobiliser for sale Immobiliser is a device that protects your car from theft by stopping the engine from running until you enter a specific pin code. It is a device that can be used on a wide variety of vehicles, and unlike standard immobilisers, this one does not require a fob or key to operate. It is also extremely difficult to bypass or hack, and operates in complete silence. This means that thieves must be quick to flee without being detected.

It guards against key locking, signal jamming, and spoofing. These are all methods that thieves have been using to unlock cars with standard immobiliser systems. The device also prevents thieves from stealing keys by digging through your letterbox or breaking inside your home to take the remote control. The device will stop thieves from driving off your joy even if they manage gain access to the key. It will stop them from starting it until they have entered the code.

A ghost immobiliser, unlike passive immobilisers, which require a fob or key to be pressed to activate it they are designed to be fully sealed within the engine. It connects directly to the data circuit in the CAN of the vehicle. The system creates a pin code by pressing buttons on the steering wheel or console, or on the door panels of your car. You will have to enter this code before your engine can begin. The system can also be put in service mode to allow your car to start and drive for short amounts of time without the requirement for a PIN code, but will be able to exit service mode based on the speed and duration.

It is not possible to hack or evade the system, even with the most advanced equipment, such as RF scanners or code grabbing devices. It is also impossible to disable with a standard vehicle immobiliser as it doesn't transmit signals like a standard immobiliser and only connects directly to the CAN data circuit.

As a result of its high-tech technology and easy installation, the ghost immobiliser is now Insurance Approved by TASSA (Tracking & Aftermarket Security System Association). We are a proud TASSA approved Ghost installer and can fit the device in your vehicle to be used for insurance purposes.

How does a ghost 2 immobiliser review Immobiliser work?

In simple terms, an immobiliser functions by stopping your vehicle from starting when the wrong fob or key is used. This is accomplished by sending an electronic code to your vehicle's ECU (Engine Control Unit) and if this code is sent by the wrong fob or key the ECU will not recognize it, and consequently your car will not start. This is why it's vital to ensure that your vehicle is fitted with an immobiliser from an established and trusted specialist.

At MotorGuard we are the Midlands most trusted security experts and installers for vehicles. We provide an Autowatch Ghost immobiliser fitting service for a large selection of modern cars, so you can rest at ease knowing that your pride and joy is secure from potential thieves.

The Autowatch Ghost immobiliser is one of the world's first aftermarket CAN bus immobilisers and safeguards your vehicle from key-cloning, hacking and theft. It's designed to remain undetected by thieves because it doesn't use LED indications or key fobs. It can be concealed within the wiring of your vehicle to ensure that no additional hardware is needed.

After installation the system is connected to your vehicles CAN system and lets you create an individual disarm sequence using your own pin code which must be entered to operate the vehicle. This pin code can be as long as 20 presses long to provide security. If you forget your pin code or if the button is broken there is an emergency code that can be used. This will allow your vehicle start again.

It's because the Ghost immobiliser ghost cannot be manipulated or hacked that it is an effective deterrent for thieves. Additionally, it is also TASSA insurance-approved (Tracking and Aftermarket Security Systems Association) which could lower your car insurance costs.

As technology continues to improve Ghost immobilisers are getting more sophisticated. In this regard, we recommend contacting an Autowatch Ghost immobiliser fitter as soon as possible to ensure that your enjoyment is completely protected. We can provide you with top quality service whether you are purchasing a brand new vehicle or upgrading your existing vehicle.

Is the Ghost Immobiliser a good fit with my vehicle?

The Ghost is the first aftermarket CAN-bus immobiliser the world to provide total protection from modern-day vehicle theft. It protects against key hacking, cloning and ECU swapping and much more. The TASSA-certified ghost immobiliser price-II system also allows the ability to mark your vehicle, connect to the International Security Register and enabling your insurance company to verify that you have an Ghost system installed.

Our Ghost Immobiliser prevents theft by making it necessary for a unique pin code is entered, or your smartphone to be equipped with our Autowatch App downloaded. It functions as a PIN for a bank card, and makes it impossible to drive away with your pride and joy without entering the correct pin or phone. Our Ghost Immobiliser System is integrated into the CAN Data Network so there is no wire cutting needed and the system is completely silent. It is inaccessible to thieves and cannot be detected by the sophisticated scanners and RF technology that other systems utilize.

When the Ghost is fitted by our trained fitters it's completely hidden and undetectable to the naked eye, it makes use of the buttons on your vehicle, for instance on the steering wheel, door panels and centre console to create an individual pin code sequence which must be entered before the engine can start, just like a password for a bank account. It is then connected to your smartphone via the Autowatch app, allowing you to go into a temporary "Service or Valet" mode that deactivates ghost for up to 30 minutes while you give your vehicle for service or transportation.

It's no surprise that the amount of stolen vehicles has risen significantly. This is due to the level of customization and personalisation that is utilized in modern vehicles as well as the fact that many of us own older vehicles. Many of them are expensive and scarce vehicles that can take months to replace after being stolen. Hence, making sure that your pride and joy is not at risk of becoming the next target is essential. A Ghost immobiliser is an affordable investment which can help ensure your vehicle stays safe and can even be used to retrieve it in the event that it is stolen.

Does a Ghost Immobiliser work by cutting principle?

Ghost immobilisers stop your car from starting until a PIN is entered along with your key fob. This prevents thieves from cloning your car keys or hacking into your car's system and could encourage them to leave your car completely.

Once fitted the ghost immobiliser will generate a unique pin code that can be as long as 20 digits through the buttons in your vehicle (steering wheel, centre console or door panels) which you must enter to start your car. This code sequence is required each time you wish to drive your car as it is similar to the PIN or password on a credit card. This code can be reset easily by entering a sequence of numbers into the Ghost app on your smartphone.

The Autowatch Ghost II CAN immobiliser also has two deactivation options for valet and service, which allow you to temporarily start your vehicle with no access code similar to the key fob, while it's in the garage or with a valet parking company. The immobiliser will be activated when your vehicle is parked.

Contrary to other security devices on the market and in comparison to other security devices, the Ghost is totally undetectable by modern thieves as it doesn't feature any LED indicators, and it operates in a silent manner using your vehicle's CAN data network. It is also not prone to the same types of circuit cut that are common to other security devices, as it does not rely on radio waves.

It is also able to be concealed and discreetly installed, making it difficult for thieves to detect and discover. It is also not detectable by advanced scanning tools or code grabbing technologies that are often employed to identify or disable security devices.

The Ghost is a top-quality modern immobiliser on the CAN bus that gives the best security against key cloning, car hacking and relay theft. It is simple to set up and is not detected by thieves. It cannot be disabled by simple wire cutting. This makes it a must-have for any driver looking to protect their vehicle.