BROMINATED S TRIAZINE FLAME RETERDANT
HIGH MOLECULAR BROMINATED EXPOXY OLIGOMER
BROMINATED EPOXY RESIN
HIGH MOLECULAR BROMINATED EXPOXY OLIGOMER
MODIFIED BROMINATED EPOXY OLIGOMER
Product.
BTAC-245Gunsan Factory
BTAC-245 is a brominated cyanuric typed flame retardant additive.
The combination of bromine and cyanuric increases FR efficiency and thermal stability, and is mainly used for ABS and HIPS
Product.
FN-500Gunsan Factory
As a reactant of Tetrabromobisphenol A and Diglycidyl ether,
FN-500 is a high-molecular, high-purity Halogen Polyhydroxy Polyether thermoplastic resin. In addition, FN-500 has a high-purity molecular structure of linear polymer with excellent hardness, plasticity, chemical resistance, thermal stability, and good electricity with heat resistance and flame retardancy because of its properties, it can be used as a flame retardant in electrical and electronic paints, wire coatings, films, engineering plastics, synthetic fibers, and thermoplastic resin moldings.
Product.
400SSiheung Factory
CXB-400S is a brominated flame-retardant EPOXY resin with a molecular weight of about 650-700.
Its appearance is a white flake, and an excellent flame retardant for various types of thermoplastic resins.
This is mainly used as a flame retardant for CCL or EMC
- - High flame retardant effect
- - Non-blooming
- - High thermal stability
- - Good mechanical properties in the final product
600SSiheung Factory
CXB-600S is a brominated oligomeric flame retardant EPOXY resin with a molecular weight of about 1,200.
This is a white fine powder in appearance and is an excellent flame retardant for various types of thermoplastic and thermosetting resins.
It is mainly used as a flame retardant for ABS and HIPS and has the following characteristics.
- - High flame retardant effect
- - Non-blooming
- - High thermal stability
- - High UV safety
- - Good mechanical properties in the final product
650SSiheung Factory
CXB-650S is a brominated oligomeric flame retardant epoxy additive having a molecular weight of 1,400~1,600
It is recommended for use in ABS and HIPS.
Due to the oligomeric nature and chemical structure of CXB-650S it is non-blooming and exhibits high thermal stability, high UV stability and good processability. Having a relatively low
softening range, it mixes and disperses readily into polymer system.
700SSiheung Factory
CXB-700S is a brominated oligomeric flame retardant EPOXY resin with a molecular weight of about 1,400.
It is a white fine powder in appearance and is an excellent flame retardant for various types of thermoplastic and thermosetting resins.
It is mainly used as a flame retardant for ABS and HIPS and has the following characteristics.
- - High flame retardant effect
- - Non-blooming
- - High thermal stability
- - High UV safety
- - Good mechanical properties in the final product
Product.
1000HSiheung Factory
CXB-1000H is a brominated polymer flame retardant that can be used for flame retardancy in a wide range of thermoplastic resins(THERMOPLASTIC).
PBT, PET, polyamide, thermoplastic polyurethane, etc can also be selected as various master batch carriers
because they are thermoplastic polymer type with a softening range of 115 to 125 °C.
- - High flame retardant effect
- - Non-blooming
- - High thermal stability
- - High UV safety
2000HSiheung Factory
CXB-2000H is a brominated polymer flame retardant that can be used as a flame retardant in a wide range of thermoplastics.
PBT, PET, polyamide (Nylon 6, Nylon 66) and thermoplastic polyurethane,
etc also have advantages of high thermal stability, excellent workability, non-blooming, and high UV stability.
Because 2000H is a high molecular weight thermoplastic polymer with a convenient softening range of 120-140°C,
it is mainly selected as a master batch carrier for various flame retardants.
2200HSiheung Factory
CXB-2200H is a flame retardant of high molecular weight brominated polymer.
It is recommended for use in a wide range of thermoplastic, such as PBT, PET, POLYAMIDES, thermoplastic polyurethanes.
Being a high molecular weight thermoplastic polymer, makes CXB-2200H a carrier of choice for various flame retardant master batches.
3000HSiheung Factory
CXB-3000H is a brominated polymer flame retardant that can be used as a flame retardant in a wide range of thermoplastics
[PBT, PET, polyamide (Nylon 6, Nylon 66), and thermoplastic polyurethane, etc]
It also has advantages of high thermal stability, excellent workability, non-blooming and high UV stability.
Because 3000H is a high molecular weight thermoplastic polymer with a convenient softening range of 130-145°C,
it is selected as a master batch carrier for various flame retardants.
Product.
300CSiheung Factory
CXB-300C is a brominated flame retardant epoxy resin with a molecular weight of about 3,500 to 4,000 and is mainly
used as a flame retardant for ABS and HIPS.
- - High flame retardant effect
- - Non-blooming
- - High thermal stability
- - High UV safety
714CSiheung Factory
CXB-714C is a brominated oligomeric flame retardant EPOXY resin with a molecular weight of about 1,250-1,350.
It is a white fine powder in appearance and is an excellent flame retardant for various types of thermoplastic and thermosetting resins.
It is mainly used as a flame retardant for ABS and HIPS and has the following characteristics.
- - High flame retardant effect
- - Non-blooming
- - High thermal stability
- - High UV safety
- - Good mechanical properties in the final product
714CLSiheung Factory
CXB-714CL is a brominated oligomeric flame retardant EPOXY resin with a molecular weight of approx. 1,100-1,200.
This is a light yellow fine powder in appearance and an excellent flame retardant for various types of thermoplastic and thermosetting resins.
It is mainly used as a flame retardant for ABS and HIPS and has the following characteristics.
- - High flame retardant effect
- - Non-blooming
- - High thermal stability
- - High UV safety
- - Good mechanical properties in the final product
1020CSiheung Factory
CXB-1020C is a brominated oligomeric flame retardant EPOXY resin with a molecular weight of approx. 1,800-2,050.
It is a light yellow fine powder in appearance, and an excellent flame retardant for various types of thermoplastic and thermosetting resins.
It is mainly used as a flame retardant for ABS and HIPS and has the following characteristics.
- - High flame retardant effect
- - Non-blooming
- - High thermal stability
- - High UV safety
- - Good mechanical properties in the final product
Directions.
Headquarters
11F, Owners Tower, 28 Hwangsaeul-ro 200 beon-gil,
Bundang-gu, Seongnam-si, Gyeonggi-do
Key phone number: 031 - 499 -1921 (~4)
Fax :031 - 498 –1601
View More
Directions.
Siheung Factory
15, Gongdan 1-daero 80 beon-gil, Siheung-si, Gyeonggi-do
Key phone number: 031 - 499 - 0333
Fax: 031 - 499 -0280
View More
Directions.
Gunsan Factory
90, Muyeok-ro, Gunsan-si, Jeollabuk-do
Key phone number: 063 - 461 –8550
Fax: 063 - 461 –8554
View More
