• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to decay or rust as timber and aluminum.

It is important to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is important to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the old frame very easily. However, if you have double-pane windows that are secured by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this case, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall onto the cloth instead of landing on the floor where they can be trodden under and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional can come out and repair the window. It also acts as a barrier, deterring any intruders to gain access into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll have to open the window so that you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and test it for fitting. If you are happy with the fit of the window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. It is important to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. This is typically caused by screws that have become undone over time, but it could be due to the handle mechanism wears out. It's fairly simple to fix a loose uPVC handle. First, you'll need close the window and then perform an initial test to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Based on the severity of the issue the caulking that was used up may require removal before a new layer can be applied. It is important to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window repair. In more severe instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The mold thrives in damp environments and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more related to the seal, not the frame. It is also possible to be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze it could be hinges that are at the fault. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Most households in the UK will have either top hung or side hung upvc window Repair windows that are hinged and, just like any mechanical component they can wear down over time. Changing a window hinge is essentially a simple process but it can be easier to do if you have someone to help you hold the frame up.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.

The issue can be caused either by opening the window improperly or due to a poor installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to give advice.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It also helps prevent corrosion and decrease the chance of sticking. The ideal time to do this at least once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. The hinges, also due to wear and tear could become misaligned. This causes an opening to appear where the sash meets the frame. If they are damaged beyond repair, it could be required to realign them. The interlock, which is located on the hinge of the window and can also be misaligned, and again it is possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

The next common reason for draughts is window seals. They are prone to wear or damaged over time and let air escape through the gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease draughts.

One of the most effective methods to reduce drafts is to use a draught excluder, these are typically fabric tubes filled with some sort of filler and can be positioned on the windowsill on top. These will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it could be more cost-effective to simply replace them rather than repair them. So, if you're having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.