• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When It's Time to Repair Windows

It is essential to be cautious when repairing your windows. First, wear a pair of cut-resistant gloves and safety goggles to stop glass shards from cutting you as you work.

An easy fix for a window that is broken is to apply a plastic cover over the crack. This will stop rain, snow and insects from entering your home.

Cracked Glass

Cracked window glass not only make your home appear less appealing but also let drafts and other elements into the house. It doesn't matter if the cracks are caused by an impact, such as soccer or a baseball or a stress like a sudden temperature drop, but it is essential to have them repaired as soon as you can to prevent further damage and to keep your windows functioning properly.

Use clear tape to cover your damaged window if it is not broken. It's a simple and inexpensive solution that will provide some protection from dust, water bugs and other particles, as well as keeping out the weather.

However, if the crack is severe or is getting worse, you should consult an expert. An experienced glazier can identify the cause of the crack and recommend an appropriate repair procedure.

Impact cracks are the most frequent window cracks. They usually occur when a sharp object hits your window with enough force that it cracks. These cracks are usually followed by a starburst pattern of lines and shattered pieces that can be risky if they break loose. If you have double pane windows, this crack could weaken the gas layer between the panes, which can affect your upvc window repairs's energy efficiency.

Stress cracks are a different kind of crack that develops due to extreme temperature fluctuations and other environmental factors. These cracks begin around the edge of your window, and can progress to full-blown breaks.

A more serious, but feasible crack is a pressure crack. It is a curvy curve that extends across the window on one or more sides. It could be caused by low or high pressure, which can cause the glass to expand or contract.

There are other products that can be used to repair cracks in glass if you're willing go beyond tape and nail varnish. A product like Glass Repair Film is a bit more expensive but will provide a bit more protection and a longer lifespan for your windows. If you'd prefer to DIY, epoxy is an adhesive that can be used to repair cracks and prevent further damage. It will make your window appear like it never had any cracks at any point.

Leaking Windows

If you notice a damp zone under your window or that the wood around it appears soft or rotting it could be time to replace your windows. Excessive moisture creates an ideal environment for mold and mildew which can cause a variety of issues for your home. They can decrease the quality of indoor air, lead to sagging drywall and even worsen allergy symptoms. Unchecked, they may also cause structural damage to your home.

If the water is coming in from outside or is visible through the frame it's best to get an expert to assist you repair the issue right away. Do not ignore windows that are leaking. They are the most frequent cause of mold and structural damage.

In many instances, a single caulking layer is enough to stop leaks. Before applying the caulking, you'll need to clean the area and take off any caulking that is in place.

Examine the weepholes on the frame for any debris. These holes are designed to remove rainwater, but they could become clogged over time with insect corpses or other debris.

If windows have double panes it is also necessary to examine the seal between the glass and the metal frame. This creates a gas barrier between the panes, which makes windows more energy efficient. As time passes the seal may wear out and allow water into your home.

Another sign of leaks is the presence of water-based stains on the ceiling and walls. The drywall becomes discolored when it is soaked with water. There is also the possibility of peeling paint, which is a result of the water weakening its adhesive properties and tearing away from the wall.

Faux Muntins & Mullions

In the past, muntins (or glazing bars as they are known in the UK), separated and held the panes of classic multi-paned windows. After WWII, larger expanses tempered glass were available. They're mostly used as a decorative feature in some older homes.

Rain or wind can cause damage to a single support or a small group, leaving an opening in the window. The good part is that you can repair most of these rotting or brittle parts.

First, use a rag to clean the affected areas. Use a cleaner based on ammonia that doesn't leave any residue. Remove any loose or rotting pieces and trim the intersections of the horizontal and vertical window muntins with an exacta knife. After you've cut the intersections, seal the lower portion of the window frame with painter's tape. Apply a thick layer of white paint to the areas that you lightly painted in the first pass. Allow the paint to fully dry before removing the masking tape and applying the second coat.

If you have an even more serious issue like a crack that forms an hourglass shape in the middle of the window, then it's probably best to replace the sash. In these instances, it's important to find the right replacement window that matches both the style and size of the present one.

To save money, you can also install an attached grid window. These windows are made of a full glass pane that has a series of muntins that are fixed to the surface. This creates a split appearance. These windows aren't as energy efficient as traditional windows.

Installing a drip-cap will stop water from getting into the window frame. There are a variety of these aluminum drip caps at the majority of home centers for around $20. They're much simpler to install than windowsash replacements and will provide you with the same functionality as a real mullion or muntin.

Broken Sashes & Frames

A damaged window sash is an obvious indication that it's time to get assistance. If left unchecked, a broken sash can cause wood rot, water leaks and more serious issues with the frame and sill. If you have a damaged sash, it is recommended to replace it right away to ensure that the window is sealed.

The issue is usually caused by worn-out or poorly installed cords. Fortunately, replacing them is relatively simple and is possible in most double-hung windows. First, you'll need to take off tabs made of metal that hold the sash. Press upwards on the side of the sash (it isn't important which side) and then pull toward the opposite side to remove it. To reach the sash cords, you'll need to remove with care the parting strips that separate the sash.

It is important to examine the metal tabs of the old sash with the new one. If they're not the same, it may be difficult to place the new sash into its correct slot and could affect the way that the sash operates. This can be corrected by placing the tabs at the correct positions on your new window.

You'll need to inspect your window frame, too, for any damage or rot. It's a good idea to do on a regular basis, as wood shrinks and wears down over time. It is important to repair any visible damage as quickly as possible to avoid a more serious issue.

If your window frames are in bad condition, you'll have to treat them using a homemade preserver made by mixing half mineral spirits with half boiled the linseed oil. After the treatment has dried, you can finish your frames with a high-quality latex paint. A fresh coat of paint will also shield your window from the elements.