• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace them, and the new window will generally fit within the frame of the previous one easily. However when you have double pane windows that are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this case, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you are going to attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any fragments of glass fall onto the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and fix the window. This will also provide an obstacle to stop intruders from getting into your home. If the gap is large, you may be interested in a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they can suffer from a variety of issues, including sagging. A sagging window can cause problems with light, draughts and even security. It is crucial to act when you discover that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to get at the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window repairs to test the fit after having repositioned your hinges. If you're satisfied with the fit of the window, tighten the screws to hold them in place.

If you are unable to move the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also become loose. This is often caused by screws that have become undone over time, but it can also be caused by the handle mechanism wearing out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and then perform an experiment to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue the old caulking may require removal before a new layer of caulk is applied. It is important to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leak originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease it could be the hinges that are at the fault. They can be easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It's very simple to change a window hinge, but it's easier if someone else helps you hold the frame.

Check that the uPVC hinges are open and closed in the proper direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or due to inadequate installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to offer advice.

It is also essential to ensure that the hinges are lubricated regularly. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the chance of windows sticking and prevent corrosion. The ideal time to do this once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. First, the hinges due to wear and tear can become misaligned, this causes a gap to form where the sash meets the frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it is feasible to give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

The second most frequent reason for draughts is window seals. These are prone to wear or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and will lessen draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be hung over your window sill. They can keep your home warm by blocking out cold air.

With a little maintenance and repairs, your upvc windows will provide a great level of security and insulation for your home. However, it is important to realize that all windows have a lifespan and there may come a point where it is more efficient to replace them than fix them. So, if you are having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.