• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. However when you have double glazed window repairs near me-pane windows that are held in place by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this case, you will need to source some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the glass so that any shards will fall onto the cloth rather than on the floor, where they could be trodden under and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will prevent water and drafts from entering your home until a professional arrives to repair the window. This also serves as an obstacle to stop intruders from getting into your home. If the distance between the window and the door is large, you might need to consider an alarm system that has an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. However, with time, they can suffer from a variety of issues, including sliding. A sagging window in uPVC could cause issues with light, draughts, and even security. It's crucial to act immediately if you notice your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit, tighten the screws until they stay in the right place.

If you aren't able to move the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. It is essential to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could also be caused by the handle mechanism wears out. It's fairly simple to repair a loose uPVC handle. You'll first need to close the window and do a test fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it's important to take action. Windows that leak water do can not only cause destruction of your home's structure but also hamper your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be done by any competent DIYer. Depending on the severity of the issue the caulking that was used up might need to be removed before a new layer can be put on. It is essential to remember that when it is about uPVC window repairs (had me going), do not be tempted to 'over-caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with a breeze it could be hinges at the fault. They can be easily replaced by any competent DIYer and can be completed in just a few minutes.

Like any mechanical component hinges will wear out over time. It is essentially a simple process but it can be easier if you have someone to help hold the frame up.

Make sure that the uPVC hinges open and close in the proper direction. Check for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges, also due to wear and tear could become misaligned. This can cause gaps to develop between the sash and the frame. This can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to have them aligned or replaced. Second, the interlock can also become disaligned. This is located on the hinge's side, and could require to be cleaned. In some instances it is possible to replace the hinges.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures, and reduce the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repair windows made of upvc will provide an excellent level of insulation and security for your home. However, it is important to recognise that all windows have a life span and they may reach an point at which it is more economical to replace them than fix them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.