• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall onto the cloth instead of landing on the floor where they could be trampled on and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional can come out and fix the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap is large, you might be interested in a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. In time, they could develop a variety of issues that include sagging. A sagging window can cause problems with light, draughts and even security. It is crucial to act as soon as you realize that your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows to access the frame. Then, using a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and verify the fitting. If you're satisfied with the fit, tighten the screws to ensure that they remain in place.

If you are unable to reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows remain watertight and secure from draughts.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it could also be due to the handle mechanism wearing out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. The first step is to close the window and perform an initial test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it's important to take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with a breeze, it may be the hinges that are at fault. They can be repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It is essentially a very simple process, but it's easier when you have a person to help hold the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem can be caused by opening the window improperly or a faulty installation at the factory. Sending us a picture via our website will often resolve the problem. We are happy to offer suggestions.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the chance of windows getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges may also become disaligned as a result of wear, which can cause gaps where the sash meets frame. These can be easily fixed by giving them a good cleaning, but if they are beyond repair it could be necessary to have them re-aligned or replaced. The interlock, which is on the hinge side of the window and can be misaligned. Again, it may be possible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

The next common reason for draughts is window seals, these are prone to wear or damaged over time and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will reduce the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be put on top of your window repairs sill. They can help stop cold air from entering and keep your home warm and cozy!

With a bit of regular maintenance and repairs, your upvc windows will continue to provide a great level of security and insulation for your home. It is crucial to recognise that all windows have a lifespan and there may come the point when it's more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance immediately.